Tiny House 101 & Tiny House Conference

Hooray! Today a new adventure begins!

I'm headed to Washington, D.C. this morning to co-teach a Tiny House 101 Workshop with the other fine folks of the Tiny House Collaborative. We have a nearly full house and it's going to be fun to share our tiny homes and our lessons learned with the workshop attendees as we help them noodle through some of the major considerations for their own tiny homes. We'll be doing sessions about inspiration and aspirations, the tiny house lifestyle, systems (including water, electrical, propane, etc.), trailers, project planning and management, and building basics. I'm especially excited to be doing a design session with Vina Lustado of SolHaus Design!

I've also never been to D.C. before AND it seems it will be peak cherry blossom time, so I've got to say that's pretty exciting as well. I've given myself an extra day in D.C. to explore the city after the workshop.

Then I'm going on a road trip. Most of my East Coast time has been in Vermont since I teach for Yestermorrow Design-Build School. So I'm really looking forward to traveling by car from D.C. to Asheville for the Tiny House Conference. The conference is the first weekend of April and I'm going to be sharing some design tips and tricks as well as leading an open space session. This will be my third year speaking at the Tiny House Conference and it will be great to see Ryan Mitchell and reconnect with these awesome speakers: Laura LaVoie, Matt LaVoie, Andrew Morrison, Lora Higgins, Ethan Waldman, and Zack Jones. (And I'll get to meet Jody Brady & Bill Brady, too!) Will YOU be there? I look forward to meeting you, too!

Let the adventures begin!

Tiny Remodeling Project

Spring has arrived early this year in the Pacific Northwest and we're already having days that are warm enough that My New & Improved Chiller can't quite hack it! Meanwhile, I'm headed to DC tomorrow to teach a Tiny House 101 Workshop with the Tiny House Collaborative this weekend and then on down to Asheville for the Tiny House Conference. So I figured I'd better get The Lucky Penny ready for my landie Jake who is going to house and cat sit for me while I'm away.

Part of my design for The Lucky Penny was to have room for a My Fridge-Only Mini Fridge and my separate Mini Chest Freezer so that I'd have lots of capacity to prepare food and freeze homemade leftovers. The freezer also doubled as a step up to my lofted Pull-Out Bed. The mini fridge tucks under the counter in the warm months and stores in The Big House basement during the cool months when I need a heater but not refrigeration. (That's when I rely on My New & Improved Chiller.) This set up has worked pretty well for me for the past year.

However, now that I'll be building a new tiny house with my partner (check out A Tiny Announcement from Lina & Isha for more on that!), I'm starting to think ahead to how I can prepare my little house to be a short-term rental. That way other people can enjoy a stay in The Lucky Penny and try on tiny for themselves! I figure people who are staying for a short visit won't get much use out of a chest freezer and they may find it inconvenient to step outside during the cooler months to access things in the chiller. Additionally, the thing my house has missed ever since I jettisoned it in favor of My Fabulous Tansu storage unit, is a comfy sitting spot on the first floor. I haven't minded much because I like perching on my window seat, but when visitors come round (and especially if they're not spry enough to clamber up to my lofted sitting spot), they tend to just stand around.

So this past weekend, along with working on Garden Beds & Graywater, I did a tiny remodeling project to replace My Fridge-Only Mini Fridge with a mini fridge-freezer combo and replace My Mini Chest Freezer with a comfy chair.

My friend and tiny house dweller Anita of Lilypad Planet passed on the mini fridge with separate freezer she was no longer using. (It turns out those of us who eat whole foods need plenty of storage space for them, so she upgraded to an apartment-sized fridge with freezer.) Unfortunately, since I raised my kitchen floors, the new fridge/freezer combo didn't quite fit inside the space under my counters. So instead of just swapping it out, I had to do some remodeling. I removed the countertop, which also involved removing the sink and faucet. I figured while I was at it I might as well add a ball valve for the shower, too. Then I cut back the 3/4" plywood underneath my wooden counter so that the new fridge with freezer would fit. I double checked all my measurements, got out the circular saw, and went for it. Fortunately, it works splendidly!

Meanwhile, I'd been eating up frozen foods over the past couple weeks so that I could stuff what was left into my now teeny (but actually functional, thank you!) freezer. Tony and Isha helped me move the chest freezer down to The Big House basement where it can be shared by the community. And I replaced it with a comfy chair!

Now that everything has been put back together, I just need to reinstall the trim piece at the front of the countertop, caulk that seam and the sink, and find risers for my chair legs so that it's not such a big hop up to the bed. The cat food cans are just the right height so they were a good improvisation, but I'm sure I can come up with something better!

I sat in my new chair for a bit yesterday while working on our Tiny House Timeline and enjoying the rain and the new perspective. I'm quite pleased with the remodel and I think other folks will enjoy it, too!

Garden Beds & Graywater

It was gorgeous on Saturday and rainy all day Sunday, which worked out perfectly for my weekend projects. On Saturday Karin, Isha, and I picked up a yard of white lightning compost and soil mix from Dean Innovations and a couple big blocks of coconut coir from Portland Nursery to fill up our raised garden beds at Simply Home Community. Karin also snagged a few fragile little pea plants, too, so it was quite an adventure getting all this garden goodness back home in Karin's lil red truck!

Karin and Isha filled up their garden beds with this rich, black soil mix then helped me fill up my two raised garden beds as well as my raised planter. My raised planter is a shipping crate that Isha and I found on the side of the road when we were on a run a few weeks ago.

I had been envisioning a raised bed like this next to The Lucky Penny because it seemed the perfect way to create an elegant solution to address multiple issues (hello, permaculture!)

• The planter will be pretty with plants growing in it.
• Tall plants like sunflowers may grow tall enough help to provide a little summertime shade at my kitchen window from the hot western sunsets.
• The planter helps create a wind-block to prevent chilly air from blowing under my house.
• It hides the otherwise unsightly storage under my house, and
• It is now part of my graywater system!

On Saturday I connected my kitchen sink and shower drains to ABS pipe that flows towards the raised bed then drilled two holes through the planter and used spare plumbing parts to disperse the water inside the planter. I then lined the planter with cardboard and tested the water flow to make sure it would distribute well. Then we filled the planter up with coconut coir (which is relatively light and friable as well as being good at holding moisture) and the white lighting soil mix.

This spring I'll be planting food and flowers in the planter box. I'd love to do carrots because it's nice and deep, but I understand it's better to not do root veggies in a graywater system. After living in my Home, Sweet Yurt with no running water, I've figured out how to be meticulous about graywater. I learned to wipe out my dishes with an unbleached paper towel and pop that into the compost and THEN wash my dishes with a biodegradable soap. At Simply Home Community our Community Living Agreements provide a very short list of approved biodegradable cleaning products and soaps. (Please note, too, that I DO NOT have any blackwater in my water system!)

So I plan to do sunflowers because they are beautiful and get tall enough that I may be able to enjoy them even from inside! I'll also probably do tomatoes here because they send down deep roots and prefer being watered low (they HATE having their leaves wet!) And it seems I'll be doing peas, too. Yesterday when it rained the water dripped right off my metal roof into the planter in a nice little line so that's where I planted the pea seeds I'd been inoculating. I know it's a little late to be starting peas, but I hope that the ability to drink up spring rain gives them a boost! Perhaps they'll be able to climb the sunflowers, too...

I also did a few tiny house remodeling projects involving my kitchen counters and my mini-fridge because everything seemed to be coming together time-wise. You can read more about that in an upcoming post this week. Stay tuned! Until then, enjoy this spring rain!

Window Shopping Again

In case you missed A Tiny Announcement from Lina & Isha, The Guy Next Door and I are building ourselves a tiny house, starting this spring. We ordered our brand new PAD Series trailer from Rob at Iron Eagle Trailers a few weeks ago. So the time has come for us to do some window shopping.

Windows and doors can take up to 6 weeks to arrive (especially if any of them are custom). So it's a good idea to get moving on windows long before you're ready to start building. Although the only non-standard components of our glazing package are Our Hobbit-Sized Outswing French Doors and the transom window above them, we needed to have our windows dialed in before we could submit our design to Patrick from Artisan Tiny House, so he can turn it into a SIPs kit. As you might imagine, our timeline nudged us to make our windows the top priority this week since I returned from the Cilantro Poncho Build Blitz in Tucson, AZ.

So here’s a little about window shopping. A few years ago I had a bout of Successful Window Shopping when I was helping Jane collect materials for her Tiny Barn. My Tiny House Started with a Window, too. It’s a beautiful arched window I acquired for free from my alma mater, Whitman College when they were replacing windows a few years ago and I decided to build The Lucky Penny around it. My Beautiful Arched Door has a leaded glass window in it and I have a massive skylight running the length of The Lucky Penny, so I knew I’d have lots of light. I was only looking for two more windows and I ended up finding My Kitchen Windows at the ReBuilding Center just before I was going to order custom windows. Several of my design clients have also pieced together their window packages using high-quality salvaged windows, especially if they are fond of a hodge-podge look. So most of my previous window shopping experience for tiny houses – and by this I mean actually acquiring windows rather than browsing the bazillion amazing products that might go into a highly-designed small space – has involved salvage.

On the other hand, over the past couple years I also helped the Marshlains and the Meyerhofers with their window shopping as part of the project management we did leading up to their build blitzes. Both of these couples decided that they didn’t want a hodge-podge look and they didn’t want to spend time scouting for windows at the rebuilding centers. Isha and I are currently in the same situation for the tiny house we’ll be building. We want a cohesive look and there are some particular sizes we’re after to make our design work well, so we’ve decided to go with a collection of new windows.

Once we had determined which window sizes we wanted (big!), what material we wanted (fiberglass!), and how we wanted them to open (every which way!), we turned this into a list of windows (called a "window schedule"). We sent our window schedule to a couple of companies in our area for quotes. We ended up having great conversations with Sue at the NE Portland Home Depot and Todd at Parr Lumber. Sue recommended Milgard windows because they’re locally made, have a lifetime warranty, and have a reputation for good customer service. Todd recommended Marvin because they have a good reputation for quality and the price point is pretty reasonable. Both of these folks have a passion for tiny houses and they were both amazing to work with, so if you're in the market for new windows in the Portland area, give them a ring!

Once we had enough information to compare casements to awnings, we realized that the Marvin quote was about $1300 less than the Milgard quote. However, Marvin isn’t able to do any colors other than white for the interior and neither Isha nor I particularly like white nor felt like doing a bunch of detailed painting. So we took a walk around the block to discuss. Isha and I both agree that if it's something we're going to interact with daily and never planning to replace, we'd better get what we like best. So we decided to go for the Milgard windows even though they were more expensive than we'd originally planned to allocate for windows. As we refine Our Tiny House Budget, we'll need to figure out where to make up for the splurge. We’ll be finalizing our window order this morning. Hooray! It’s another great tangible step towards our tiny house dream.

Next up: Ordering Our Tiny House SIPs Kit!

A Tiny Announcement from Lina & Isha

Now that the Meyerhofer's Tiny House, Cilantro Poncho, has sprung to life in Tucson, AZ through last week's build blitz, Isha and I have decided it's time to make a tiny announcement of our own.

As many of you know, last summer I fell in love with The Guy Next Door. For the past nine months Isha and I have been living in his and hers tiny houses at Simply Home Community. 

Now Isha and I are expecting... that our baby will be here with us in about 9 months. And yes, we already know what it's going to be!

We're making a Tiny For Two!

We're affectionately referring to it as T42 or "tea for two" for the time being, though like most expectant parents, we're still considering names.

This is, of course, what sometimes happens after a bad case of Trailer Lust.

Isha and I placed the order a couple weeks ago for our 24' PAD Series Tiny House Trailer from Iron Eagle Trailers in Fairview, OR. (Yes, we even know how big it's going to be when it arrives. In fact, we were specific about that!) Rob built the trailer for my vardo, The Lucky Penny, so we know it's going to be a great foundation for our new little house. The trailer should be ready by the end of March and we'll begin building in April. We're deep in the design phase right now and we're looking forward to revealing the design soon. We've been Window Shopping Again and looking forward to Ordering Our Tiny House SIPs Kit. If you'd like to help out with the build, please get in touch.

Stay tuned for more! We're rather giddy and excited to share our new little house with you!

Cilantro Poncho Build Blitz Day 6

Yesterday was Day 6 (our final day!) of a week-long build blitz for the Meyerhofer’s tiny house, Cilantro Poncho. Day 1 was a prep day, Day 2 and Day 3 we worked on wall raising, Day 4 and Day 5 we prepped for the roof, and yesterday we finished the roof and touched up our water resistant barrier!

The day’s tasks included:

• Finishing liquid flashing around the away room windows
• Applying sealant to seams and troweling smooth
• Cut out the sill plate at door
• Finish liquid flashing at door sill
• Touching up the water resistant barrier with one more coat
• Installing roof splines
• Installing remaining roof sections
• Installing perimeter framing

At lunchtime we had a picnic inside the new house and Courtney and Kurt gave those of us who helped all week very thoughtful gifts. During the afternoon we finished up the framing around the roof perimeter and did the final touch ups on the water resistant barrier.

In the evening Kurt and Courtney hosted Cilantro Poncho’s First Open House. This was a chance for people who were curious about the tiny house to come take a peek and see the progress we made in a week. Andy, who had helped the first two days of the build blitz came back down from Tempe to see how much more we got done in 4 more days and Walt and Bernice Venable (who I did some concept design work with) came to take a look so I got to meet them in real life.

As the evening sky broke into a magnificent sunset I gave them my parting gift, which seemed quite appropriate for the adventure they’re embarking upon. Fortunately, it wasn’t quite goodbye. We’re meeting up this morning for breakfast to talk about next steps and to sort out tools so I can pack for my journey home. What an incredible honor to help make this tiny house dream come true for the Meyerhofers!

Cilantro Poncho Build Blitz: Day 5

If you’d like to come see what we accomplished during the Cilantro Poncho Build Blitz, please come visit us for Cilantro Poncho's First Open House at 5:30 pm on Friday, March 11 at 4674 N Kain Ave, Tucson, AZ 85705.*

Yesterday was Day 5 of a week-long build blitz for the Meyerhofer’s tiny house, Cilantro Poncho. Day 1 was a prep day, Day 2 and Day 3 we worked on wall raising, and Day 4 we got our final wall panel up and prepped for the roof. Yesterday we finished up roof prep, applied liquid flashing for the windows, and got the first two roof panels up.

We also had a special lunch and dessert for Richard, who was celebrating his birthday. It’s so cool that he chose to spend his birthday week helping Courtney and Kurt to get their little house started! His help has been invaluable this week and we’re so grateful for him! Richard’s birthday presents from me were enrollment in my upcoming Tiny House Considerations Course and a design consultation, so I’m glad that I’ll get to help him move his tiny house dream forward, too.

The day’s tasks included:

• Beveling perimeter framing for roof panels
• Leveling the trailer
• Applying liquid flashing around the exterior of the windows
• Cutting and attaching “outriggers” to the end roof panels
• Hoisting the first panel into place
• Squaring up the panel
• Attaching the first roof panel to the top plate with SIP screws
• Installing the first spline into the second panel
• Installing the second panel

It was hot yesterday so we were mindful of staying hydrated and sunscreened. We also took breaks in the shade whenever we needed them, but we still made good progress. After all the head scratching related to the trailer camber on Day 3, it was exciting to see how nicely the house settled onto the trailer and leveled out once we removed the shims and lowered the stabilizing jacks. Having the top plates attached at the top of the walls really helped and we expect the additional weight of the roof panels will make the house level out completely.

Mark, Richard, and Kurt worked on ripping, beveling, and mitering the remaining framing for the perimeter of the roof panels while Courtney prepped the roof panels for the framing by removing a little excess foam with the 6” foam cutter. Meanwhile, Andrea worked on liquid flashing on the windows. All those years of cake decorating have made her our go-to liquid flasher! She’s good! Courtney and I joined Andrea for window flashing a while later and I enjoyed visiting with Courtney while we passed the sausage gun back and forth. With so many power tools going all week long, it was nice to have a little quiet time to visit!

Getting those first two roof panels up was really exciting and we were tempted to do more, but it had been a long, hot day and Andrea and Mark had a special invitation to have supper with some friends of theirs, so we decided to end on a high note. And by a high note, I mean that Kurt and Courtney climbed up onto their roof to admire the view of the Santa Catalina Mountains!

Tomorrow we’re eager to get the last of the roof panels on, do some touch ups on the water resistant barrier, and install a window so Courtney and Kurt know how that’s done.

If you’d like to come see what we accomplished during the Cilantro Poncho Build Blitz, please come visit us for Cilantro Poncho's First Open House at 5:30 pm on Friday, March 11 at 4674 N Kain Ave, Tucson, AZ 85705.*

*If you’re reading this after Cilantro Poncho's First Open House and you’d like to visit, please be sure to contact Courtney and Kurt to arrange a day and time. They can’t accept unannounced visitors because they’ve got work to do finishing their little house and they need to make sure everyone who visits can do so during a time that’s safe. Thanks!

Cilantro Poncho Build Blitz: Day 4

If you’d like to come see what we accomplished during the Cilantro Poncho Build Blitz, please come visit us for Cilantro Poncho's First Open House at 5:30 pm on Friday, March 11 at 4674 N Kain Ave, Tucson, AZ 85705.*

Yesterday was Day 4 of a week-long build blitz for the Meyerhofer’s tiny house, Cilantro Poncho. Day 1 was a prep day, Day 2 we began the wall raising, and Day 3 we got all but the last panel up, so we were eager to get that last wall up yesterday.

We worked in pairs to accomplish the day’s tasks, including:

• Bolting down the last sill plate
• Erecting another set of scaffolding
• Beveling & installing top plates
• Creating a plan for beveling roof perimeter framing and testing a piece with an 8” board
• Installing framing in door & remaining windows
• Applying liquid flashing to rough openings (ROs)

Once we got our final sill plate bolted down that final panel slipped right into its spot so nicely it felt like it was magnetized! It was awesome to have the house finally be a box!

We were on a roll when quitting time came along so we continued working for another hour in the cooler evening air. We have two more rough openings to flash with the liquid flashing and some beveling to do for the roof perimeter framing, so that we can get our first roof panel up. I found myself dreaming about that first roof panel going up last night. It will be fun to make that dream come true!

*If you’re reading this after Cilantro Poncho's First Open House and you’d like to visit, please be sure to contact Courtney and Kurt to arrange a day and time. They can’t accept unannounced visitors because they’ve got work to do finishing their little house and they need to make sure everyone who visits can do so during a time that’s safe. Thanks!

Cilantro Poncho Build Blitz: Day 3

If you’d like to come see what we accomplished during the Cilantro Poncho Build Blitz, please come visit us for Cilantro Poncho's First Open House at 5:30 pm on Friday, March 11 at 4674 N Kain Ave, Tucson, AZ 85705.*

Yesterday was Day 3 of a week-long build blitz for the Meyerhofer’s tiny house, Cilantro Poncho. We got rained on most of the night so we did a 1-hour delayed start to give things time to dry out enough that the mastic would set up. Courtney arrived with a well-organized task list for the day which we checked in on first thing. The day before we raised most of the walls during Cilantro Poncho Build Blitz: Day 2. Additionally, two of the remaining sections were small, so we figured it would be easy-peasy getting the rest of the walls up in the morning.

However, yesterday ended up being a head-scratching day and we all learned a bunch. As we got one full long wall up we discovered that when we lined up the tops of the panels we had to shim the bottoms a fair bit in the middle. The ideas were flying as we brainstormed possible solutions.

We were trying to make sense of it and we came back to the notion that the trailer was bowed. We were all pretty perplexed, so we gave Damon at Trailer Made a ring to learn more. Damon assured us that the bow (which they call a “camber”) is not only totally normal but also totally on purpose.

“You know how when you see a semi flatbed it is usually bowed the other way, like a rainbow?” he asked. “That’s because when it’s fully loaded it flattens out under the load. With a tiny house trailer we do the opposite because all the weight is around the perimeter. We give it a little camber so that as the walls are positioned the trailer flattens out.”

Damon confirmed that we were better off not adding permanent shims at the bottom because as the top plates go in and the roof goes on the house should settle into position. We’ll be able to remove the shims as the trailer flattens out. We all breathed a sigh of relief.

I felt silly for not calling Damon up and asking the question earlier. I’d heard of trailers with a bow built into them but I’d never worked with one before. However, I realized that I should have checked in about this on Friday when we first suspected it might be the case with this trailer. That day Courtney, Kurt and I had leveled the trailer as well as we could, which involved taking some weight off the axels as we raised the jacks, and we found that the trailer seemed to tip in both ways. It was slight so I didn’t think much of it. Turns out, when you have a few thousand pounds of SIPs on the trailer, it starts to matter – a lot!

Now that we had a better sense of how to work with the trailer, we employed Andrea’s suggestion to let the trailer down onto its axels so that the ends could tip back down. That helped quite a bit, but the mastic had set up on that second panel we’d installed the day before, so it wasn’t budging, even after we removed the fasteners. We realized we’d have to live with it. Fortunately, we were able to get the rest of the long wall panels up and lined up. When we did our final measurements we found we were only off by about a ¼”. Since we know just where that came from, we’re pretty pleased.

I’m thoroughly impressed with how high morale remained throughout this process. I’m grateful to the Meyerhofers for their graciousness and to Mark, Andrea, Chris, and Richard for their patience, their creativity, and their willingness to try new things. It was great having so many math lovers amongst the group because it enabled us to make great use of materials and do some clever problem solving.

I’m going to stop making predictions about how long things should take now, but I’m glad that we’re finally in good shape to get that last wall up tomorrow! We’re half way through our six-day build blitz and I’m eager to see what more we can accomplish for Courtney, Kurt, and the Cilantro Poncho! If you'd like to come visit, please join us for Cilantro Poncho's First Open House.

*If you’re reading this after Cilantro Poncho's First Open House and you’d like to visit, please be sure to contact Courtney and Kurt to arrange a day and time. They can’t accept unannounced visitors because they’ve got work to do finishing their little house and they need to make sure everyone who visits can do so during a time that’s safe. Thanks!

Cilantro Poncho Build Blitz: Day 2

If you’d like to come see what we accomplished during the Cilantro Poncho Build Blitz, please come visit us for Cilantro Poncho's First Open House at 5:30 pm on Friday, March 11 at 4674 N Kain Ave, Tucson, AZ 85705.*

Yesterday was Day 2 of a week-long build blitz for the Meyerhofer’s tiny house, Cilantro Poncho. We started the Cilantro Poncho Build Blitz Prep on Friday and Cilantro Poncho Build Blitz: Day 1 included more prep for our wall raising, which we began yesterday. We had two more people come to join us for the work party: Kurt’s brother Chris and a friend of mine from college, Katie, who both came down from Phoenix.

After check ins and a review of Courtney and Kurt’s goals for the day, we split into work crews got started on the day’s project list which included the following:

• Installing corner framing
• Removing trailer light temporarily to provide access for bolts on tail end of trailer
• Drilling 5/8” holes through the trailer flange
• Bolting the sill plates to the trailer with ½” bolts, nuts, and a bevy of washers
• Erecting scaffolding
• Prepping and positioning the first wall
• Spray foaming and masticing the first wall
• Tipping up the first wall, plumbing it, bracing it, and tacking it to the bottom plate

By then it was lunch time. It was awesome to have that first wall up by lunch and so fun to see everyone working together at a team. In the afternoon we started in on our next list of tasks:

• Tipping up the second and third wall sections and attaching the first two corner sections in place with SIP screws
• Installing SIP splines
• Installing the fourth panel
• For panels with wheelwells: tracing the wheelwell pattern on the SIP (making sure it’s the right direction and measured properly from the end!), cutting the bottom of SIP, scooping out foam with the foam cutter, and installing blocking in the bottom of the SIP.

We found that when the back wall was completely plumb there was a gap at the top of both corners where the SIPs came together, but the SIP screws managed to cinch everything together nicely.

We ended up working an extra hour to take advantage of all the help we had and it was great getting the trickiest panels up. We have five of the nine wall panels up and all the ones with wheel wells are done now. Tomorrow should be smooth sailing as we get the last four panels up and then we’ll be able to start prepping for the roof!

*If you’re reading this after Cilantro Poncho's First Open House and you’d like to visit, please be sure to contact Courtney and Kurt to arrange a day and time. They can’t accept unannounced visitors because they’ve got work to do finishing their little house and they need to make sure everyone who visits can do so during a time that’s safe. Thanks!